C Preventive maintenance – Preventive maintenance 5 page 50h-check For new machine, checks shall be performed after 50h operating time. Checks are performed to increase the machine’s reliability.
UDRF01.04GB Maintenance manual DRF 400–450 1 Engine Reference Leakage check oil, coolant, exhaust system Coolant level, check Section 1 Engine, group 1.7.7 Coolant Oil and oil filter, change Section 1 Engine, group 1.8 Lubrication Air filter main cartridge, inspection Section 1 Engine, group 1.6.1 Air cleaning system Air filter safety cartridge, inspection Section 1 Engine, group 1.6.1 Air cleaning system Drive belt tension, check Section 1 Engine, group 1.7.5 Cooling fan Bolted joints, attachments, mountings, hose clamps, wear and chafing of hoses, cable harnesses, etc.
Fuel pre-filter, drain water Section 1 Engine, group 1.2.3 Fuel pre-filter 2 Transmission Leakage check Oil level, check Section 2 Transmission, group 2.6 Lubrication Transmission oil filter, changing Section 2 Transmission, group 2.6 Lubrication 3 Driveline/axle Mounting propeller shaft, check-tightening Section 3 Driveline/axle, group 3.2 Propeller shaft Mounting drive axle, inspection Section 3 Driveline/axle, group 3.3 Drive axle 4 Brakes Power-assisted brake, function check Section 4 Brakes, group 4.3.4 Accumulator Parking brake, function check Leakage check 5 Steering No action 6 Suspension Tyre system, check Section 6 Suspension, group 6.3 Tyre and rim system Wheel nuts, check-tightening Section 6 Suspension, group 6.3 Tyre and rim system 7 Load handling Hose connections, check-tightening Chain tension extension (spreader), check and adjust Section 7 Load handling, group 7.5.7 Positioning chains 8 Control system Check that there are no active error codes Section 8 Control system, group 8.3 Error codes