C Preventive maintenance – Preventive maintenance 9 UDRF01.04GB Maintenance manual DRF 400–450 Object, action Service Comment Reference 500h, 1500h, 2500h etc. 1000h, 3000h, 5000h, etc. 2000h, 4000h, 6000h etc. Drive axle oil R R For volume and quality, see section F Technical data Section 3 Driveline/axle, group 3.3 Drive axle Mounting drive axle C C Section 3 Driveline/axle, group 3.3 Drive axle 4 Brakes Brake oil filter R R R Section 4 Brakes, group 4.8.12 Brake oil filter Accumulator C C C Section 4 Brakes, group 4.3.4 Accumulator Parking brake C / R C / R C / R Check pad thickness, change when needed. Section 4 Brakes, group 4.5.4 Parking brake unit Oil cooler C C C Clean when needed.
NOTE! Not high-pressure washer. Oil brake system R For volume and quality, see section F Technical data Section 4 Brakes, group 4.8.14 Oil brake system Breather filter R Section 4 Brakes, group 4.8.11 Breather filter 5 Steering Link arms C / L C / L C / L Check bearings. Lubrication 500 hours page 14 6 Suspension Steering axle mounting C C Section 6 Suspension, group 6.2.1 Steering axle cradle Wheel spindle, checking C C Clearance in wheel sus- pension shall be checked. Max. 1.5 mm. Section 6 Suspension, group 6.2.2 Wheel spindle Wheel hub steering axle, checking C Check bearing pre-load.
Section 6 Suspension, group 6.2.3 Wheel hub Tyre system C C C Damage, wear and pres- sure, change as needed. Section 6 Suspension, group 6.3 Tyre and rim system Wheel nuts C C Check-tightening. Section 6 Suspension, group 6.3 Tyre and rim system 7 Load handling