1 Engine – 1.2 Fuel system 9 1.2 Fuel system page Fuel system, description For position of components, see Engine alternative Volvo, compo- nent position page 4 or Engine alternative Cummins, component po- sition page 7 . 1 2 3 002289 1. Filling point, fuel 2. Fuel tank 3. Sensor, fuel level (behind air filter) page Fuel system, bleeding (engine alternative Volvo) 1 Clean the area around the bleeder nipples on the fuel filter's bracket and cylinder head. 2 Place a receptacle under the fuel filter. 3 Connect a transparent plastic hose to the bleeder nipple on the filter bracket. Place the other end of the hose in the collection container. 4 Open the bleeder nipple on the filter bracket.
5 Pump up fuel with the hand pump until clean fuel free of air bubbles flows out of the hose. NOTE If only the fuel filter has been changed, no further bleeding is required. 6 Transfer the hose to bleeder nipple on the cylinder head, bleed in the same way as by the fuel filter. UDRF01.04GB Maintenance manual DRF 400–450