26 1 Engine – 1.11 Start/stop 1.11 Start/stop page Start/stop, description (engine alternative Volvo) The engine is started and stopped with the ignition. The ignition sends signals to Control unit KIT (D790-2) and Control unit cab (D790- 1) which send messages via CAN-buss drivetrain to Control unit en- gine (D794). Starter motor and stop device are controlled by Control unit engine (D794). Start interlock (immobilizer) is available as an option, where a code must be entered via the display before the engine can be start- ed. For position of components, see Engine alternative Volvo, compo- nent position page 4 .
page Start/stop, description (engine alternative Cummins) The engine is started and stopped with the ignition. The ignition sends signals to Control unit KIT (D790-2) and Control unit cab (D790- 1) which send messages via CAN-buss drivetrain to Control unit frame rear (D797-R) that activates the starter motor via relay (k360) Stop is controlled by Control unit engine (D794). Start interlock (immobilizer) is available as an option, where a code must be entered via the display before the engine can be start- ed. For position of components, see Engine alternative Cummins, com- ponent position page 7 . UDRF01.04GB Maintenance manual DRF 400–450