Kaiyi UDRF01.04GB — 2 Transmission

2 Transmission – 2 Transmission 3 mm mm mm mm 2 Transmission page Transmission, function description The transmission converts the engine power to the drive wheels (drive axle) via the propeller shaft and also power to drive the hy- draulic oil pumps for hydraulics and the brake system. The transmission is fully automatic with torque converter. It has four forward gears and four reverse gears. The torque converter and the transmission work together via a com- mon hydraulic system. The torque converter is a hydraulic clutch placed between the engine's output shaft and the transmission's in- put shaft.

The hydraulic oil pumps as well as the oil pump for the transmission's control and lubrication are connected to the torque converter via power take-offs on the transmission. Gear positions are selected by pressure modulation with electrical valves that are controlled by Control unit transmission (D793). The control unit uses sensors for pressure, temperature and speeds to determine which gear position shall be activated as well as solenoid valves to activate the gear. 2 F R 1 5 4 6 D790-1 D790-2 D795 3 21 7 D793 D794 18 D797-F 20 Pa 19 9 17 10 8 004728 1. Multi-function lever (S162) 12.

Sensor engine speed and oil temperature (B758/766) UDRF01.04GB Maintenance manual DRF 400–450 13 14 15 Pa ˚C