Determining corrected installation dimension and EP code for injection pump. When replacing crankcase, camshaft or roller tappets, the corrected installation dimension (E K ) must be determined once again and the relevant EP code on the name plate must be changed. For tables see pages 1.00.15 and 1.00.17. 1 Calculation example: BFM 2012 © 2002 / 0312 0361 1.00.19 Cylinder No. 0 1 2 3 4 5 6 L0 from table 1 mm 117.5 FB measured °C/A 8 FB nom. from table 1 °C/A 7 Vh corr. factor from table 1 mm/°C/A 0.14 Vh nom. from table 1 mm 4.26 L measured mm 125.28 E1 = FB act. - FB nom. °C/A 1 E2 = E1 x Vh corr. factor mm 0.14 E3 = E2 + Vh nom. mm 4.40 E = L - E3 mm K 120.88 E symm.
rounded mm K 120.875 EP code from table 3 295