BAIC — BAIC Comanche Service Manual: Comprehensive Guide for PA-24 Series Aircraft

PIPER COMA~CHE SERVICE :WA~rAL U1 '. ·.U'OT·~I ...... Z o~. '''1'0 40JU,T ..... T 10~' .... TU". "OJU'T"'''T ... ~UI~ ,e"II" s, "'.":"111 ..... F1Gl'RE 78-6. IDLE SPEED AND MIXTl'RE ADJt'STMENT (Ft'EL I:\JECTOR) iB-~ I. Adjustment Of Throttle And !\'fixture Controls, The throttle and mixture controls arc udiu-ted '0 that when the throttle arm on the injector is rotated forward against its full throttle stop and the mixture arm is rotated forward against its full rich stop. their respective cockpit controls should be .()~.:! of an inch in from their full forward stops. a. At the injector. disconnect the throttle and or mixture control cable end from its control arm. b. l.oo ...

en the jam nut securing the cable end. c. Adjust the linkage by rotating the cable end to obtain the .0(,2 of an inch spring back of tho: cockpit control lever when the throttle or mixture control arm contacts its stop. d. Reconnect the cable end to its control arm and secure jam nut. e. Pull the throttle and mixture controls in the cockpit full aft to ascertain that the injector idle screw contacts its stop and the mixture control arm contacts its lean position. -:'B-J::!. Adjustment Of Idle Speed And Mixture. (Refer to Figure 7B-6.) a, Start the engine and warm up in the usual manner until oil and cylinder head temperature- arc normal. b. Check magnetos. If the "mag-drop" is normal.

proceed with idle adjustment. c. Close the throttle to idIe. If the R PM changes appreciably after making the idle mixture adju ... trne nt during the succeeding steps. readjust the idle speed to the desired RPM. ISSl"EO: 8/18/72 2FIO POWER PLA,r