PIPER COMANCHE SERVICE MANUAL FIGURE 78-7. FUEL AIR BLEED NOZZLE NOTE Do not exceed 60 inch-pounds torque on nozzles wh.en aligninJ air bleed hole. d. Connect fuel line to nozzle. CAUTION SW't nozzles and line couplinp bY' hand to prevent the possibility of c:ross-ehreadin" e. IftStall engine cowlinc. 78-37. IpitiOD Sysrem MaiDtnancc. 78·38. Inspection Of Mapcm. a. Remove h.amess assembly cover from mapetO and inspect partS for moisture, broken leads or other ciam.,c. b. Swinl lads out of outlets in distributOr block and remove two Krews sccurilll block in hOUSing. Lift the block from mapcto. c. To properly inspect the breaker compartment and breaker points.
it will be necessary to remove the distributor t1ft1er by removing the two &ttachinJ screws and washers. d. Inspe« breaker poinrs for excessive wcu or burning. Desired contact surfaces will have :l dull gray sandblasted or frosted appearance. .Minorin'qularitics or roulhncss of point surfaces arc not harmful. POWER PLANT 1551;[0: 8/18/71 2 F12