Komatsu — BRAKE VALVE

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD BRAKE VALVE 2. When brake is applied (parking brake OFF, brake pedal depressed) When the brake pedal is depressed, guide (11) and shaft (9) are pushed to the right in the direc- tion of the arrow, and modulating spring (10) is compressed. The reaction force moves brake valve (7) to the right in the direction of the arrow. When this happens, ports C and D are closed, and port D and drain port E are opened, so the oil from the power train pump enters port A and stops at port C .

Some of the oil flowing into the brake piston port and forming the back pressure is drained from port D to port E , and the rest of the oil passes from port D through orifice a and enters port H . However, the oil beyond port D is drained to port E , so the oil pressure drops. the oil entering port H pushes piston (8) and the reaction force pushing brake valve (7) to the right in the direction of the arrow becomes smaller, so brake valve (7) is moved to the left in the direc- tion of the arrrow by the tension of return spring (6). This closes ports D and E , so the oil pres- sure beyond port D does not drop any further and is maintained at the same level.

If the brake pedal is depressd further, the above operation is repeated, and when the valve reaches the end of its stroke, the brake is com- pletely applied. The oil pressure beyond port D is determined by the tension of return spring (6), which changes the load according to the amount that the brake pedal is operated. Therefore, if the brake pedal is depressed only a short distance, the oil pressure beyond port D is set at a high level, and the brake is partially applied. If the brake pedal is depressed a large amount, the oil pressure is set at a low level and the brake is applied. D85EX-15 10-87