Komatsu — TRACK SHOE

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD TRACK SHOE Unit: mm D85EX-15 10-107 (2) No. Check item Criteria Remedy 1 Link pitch Standard size Repair limit Turn or replace 216.3 219.3 2 Outside diameter of bushing Standard size Reverse Reverse or replace Light load Heavy load 79.5 69.3 71.9 3 Thickness of bushing 15.9 5.7 8.3 4 Height of link Standard size Repair limit Rebuild or replace 140 127.5 5 Thiuckness of link (Fitting portion of bushing) 43.5 31 6 a. Shoe bolt (Single and heavy duty shoe) b. Regular link Tighten torque (Nm {kgm}) Retightening angle (Angle) Retightening or replace 343 ± 39 {35 ± 4} 120 ± 10 Master link 343 ± 39 {35 ± 4} 180 (+0/ –20) a. Shoe bolt (Swanp shoe) b.

Regular link 539 ± 49 {55 ± 5} 120 ± 10 Master link 343 ± 39 {35 ± 4} 180 (+0/ –20) 7 Interference between bushing and link Standard size Tolerance Standard interference Adjusting or replace Shaft Hole 74 + 0.344 + 0.304 + 0.074 0 0.230 – 0.344 8 Interference between regular pin and link 47 + 0.190 + 0.130 + 0.138 + 0.200 0.268 – 0.390 9 Clearance between link and link Standard clearance Each size Both limit 1.4 2.8