STRUCTURE, FUNCTION AND MAINTENANCE STANDARD WORK EQUIPMENT CONTROL 1. Work equipment safety lever 2. Blade control valve 3. Ripper control lever 4. PPC lock valve Lever positions A : Blade HOLD B : Blade LOWER C : Blade FLOAT D : Blade RAISE E : Blade LEFT TILT F : Blade RIGHT TILT G : Ripper HOLD H : Ripper RAISE J : Ripper LOWER K : Ripper TILT IN (For variable multiple shank ripper) L : Ripper TILT BACK (For variable multiple shank ripper) M :FREE N : LOCK Outline The work equipment control employs a PPC method which uses a PPC valve to move each control valve spool.
Work equipmentc safety lever (1) is intercon- nected with PPC lock valve (4), and at the LOCK position, the oil in the PPC circuit is stopped. D85EX-15 10-117 (3)