STRUCTURE, FUNCTION AND MAINTENANCE STANDARD PISTON VALVE PISTON VALVE FOR BLADE LIFT CYLINDER Outline The piston valve is installed on the piston in the blade lift cylinder. When the piston reaches its stroke end, the valve releases the oil from the hydraulic pump to reduce the oil pressure being exerted on the piston. When the blade is tilted, the blade is subject to a tortional force owing to the uneven position of the pistons in the two cylinders; that is the piston one side is still moving while the piston on the other side has reached its stroke end. The piston valves are installed to prevent the tor- tional force from occurring.
When one of the pis- tons reaches its stroke end, its piston valve opens to relieve the oil pressure. In addition the piston valve relieves the shock which occurs when the piston comes into contact with the cylinder head or the bottom and serves to redure the subsequent surge pressure in the cylinder by letting the oil escape from the cylin- der before the piston reaches its stroke end. Operation 1. Piston valve CLOSED Pressurized oil from the hydraulic pump acts on piston (2) and piston valve (3).
The piston valve (3) is pushed in the direction of the arrow until piston valve seat (4) comes into snug contact with the tapered section, thereby, this causing the pressure in the cylinder to rise and moving piston (2) in the direction of the arrow. 2. Piston valve OPEN Just before piston rod (1) reaches the end of its stroke, the tip of valve (6) contacts the cylinder bottom, so valve (6) and piston valve (3) stop at that position and do not move further. Only pis- ton (2) moves further. When this happens, the oil at the cylinder head, which was sealed by piston valve (3), escapes from piston valve seats (4) and (5), and the pres- sure inside the cylinder stops rising. 10-138 D85EX-15