Komatsu — CONTROL VALVE

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD CONTROL VALVE Function The steering valve is equipped with a steering priority valve (3), so if the steering valve and the downstream work equipment valve are operated at the same time, priority is given to the flow of oil to the steering valve, and the rest of the oil dis- charged from the pump goes to the work equip- ment valve. 2. When pump swash plate is at maximum angle When the maximum flow of oil from the pump is smaller than the sum of the oil flow demanded by the steering valve and work equipment valve. (1) When steering valve load work equipment valve load.

An amount of oil that matches the opening of steering spool (1) flows to the steering valve, and the remaining oil flows to work equip- ment valve. (2) When steering valve load > work equipment valve load. Pump pressure P is determined by the steer- ing valve load, but in this condition, if the downstream work equipment valve where the load is smaller is operated the difference in pressure will cause the oil to try to flow to the work equipment valve, so the pump pres- sure will drop.

When this happens, steering priority valve (3) increases the size of the opening to the steering system, while at the same time reducing the size of the opening to the work equipment in order to ensure the flow of oil to the steering system. In this condition, the flow of oil is divided in proportion to the difference in pressure between differential pressure P P1 and dif- ferential pressure P P2 . The bigger P1 P2 is, the smaller the flow of oil to the steering system becomes. Operation When steering spool (1) is operated by pilot pressure P1 and the oil flows, a differential pres- sure is created between chambers C and D .

Steering priority valve (3) is controlled by this dif- ferential pressure, and at the same time, the pump swash plate angle is controlled at PLS = 2.0 MPa (20 kg/cm 2 ), and the flow of oil to the steering valve is fixed. See Item 2 – (1) Steering valve . In this condition, if downstream blade lift valve (2) is operated, the pump pressure momentarily drops . At this point, the differential pressure between chambers C and D becomes smaller, and steer- ing priority valve (3) is moved to the left by the pressure in chamber E in the direction to throttle the opening to the hydraulic valve.

At the same time, PLS becomes smaller, so the pump swash plate angle moves in the maxi- mum direction to supply an oil flow to make up the amount that the pressures drops. 1. When pump swash plate does not reach maxi- mum angle When the maximum oil flow from the pump is greater than the sum of the flow demanded by the steering valve and work equipment valve, an amount of oil that matches the opening of steering spool (1) flows to the steering valve; An amount of oil decided by the pump pres- sure and load pressure and area of opening of the spool flows to the work equipment valve. D85EX-15 10-187