Komatsu — BLADE

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD BLADE Unit: mm D85EX-15 10-203 No.

Check item Criteria Remedy 1 Clearance between brace and pin Standard size Tolerance Standard clearance Clearance limit Replace Shaft Hole 60 – 0.3 – 0.5 + 0.5 + 0.3 0.6–1.0 2 2 Clearance between brace pin and bracket 60 – 0.3 – 0.5 + 0.5 + 0.2 0.5–1.0 2 3 Clearance between brace spheri- cal surface and cap 100 0 – 0.1 + 0.5 + 0.2 0.2–0.6 1 Adjust shim or replace 4 Clearance between center brace spherical surface and cap 100 0 – 0.1 + 0.5 + 0.2 0.2–0.6 1 5 Clearance between joint and blade bracket 120 – 0.2 – 0.7 + 0.5 + 0.3 0.5–1.2 2 Replace 6 Clearance between frame pin and joint 60 – 0.3 – 0.5 + 0.3 0 0.3–0.8 3 7 Clearance between blade brack- et pin and bracket 60 – 0.3 – 0.5 + 0.3 0 0.3–0.8 3 8 Clearance between blade brack- et pin and joint 60 – 0.3 – 0.5 + 0.3 0 0.3–0.8 3 9 Clearance between center brace spherical surface and cap 100 0 – 0.1 + 0.5 + 0.2 0.2–0.6 1 Adjust shim or replace 10 Clearance between center link pin and center link 85 – 0.3 – 0.5 + 0.1 – 0.1 0.2–0.6 2 Replace 11 Clearance between center link pin and blade bracket 85 – 0.3 – 0.5 + 0.3 0 0.3–0.8 2 12 Clearance between center link and blade bracket 196 0 – 0.1 + 0.5 + 0.3 0.3–0.6 2 13 Clearance between trunnion and cap spherical surface 160 – 0.5 – 1.0 + 0.5 0 0.5–1.5 8