STRUCTURE, FUNCTION AND MAINTENANCE STANDARD PALM COMMAND CONTROL SYSTEM Shift mode function 1. Function If you shift the PCCS lever to the forward or reverse, the gear speed selected from the shift mode is turned on. Shift mode 1: F1/R1 Shift mode 2: F1/R2 Shift mode 3: F2/R2 2. Type of modes (1) F1-R1 (2) F1-R2 (3) F2-R2 3. Selecting method Turn the preset mode switch "ON". Shift the PCCS lever to “N”. Select a mode with the shift up switch and shift down switch. Shift up switch ON Shit up switch ON Shift mode 1 Shift mode 2 Shift mode 3 Shift down switch ON Shift down switch ON 4. Displaying method The selected mode is displayed on the monitor panel. Auto Shift-down Function 1.
Function This function automatically shifts the gear speed down if load is increased while the machine is travelling at 2nd or 3rd speed or while the machine is in operation. 1) This function turns on the shift-down auto- matically by calculating the drawbar pull (load to the machine body) based the engine speed, transmission speed and throttle infor- mation from the steering controller. 2) Once the machine is automatically shifted down, it is not automatically shifted up again to the former gear speed (it can be shifted up with the shift switch, however). 3) This function is available for both the forward and reverse travel. 2. Selecting method Turn the auto shift-down switch (1) “ON”.
D85EX-15 10-227