Komatsu — SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS)

TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS) Action code display function If a fault to be notified to the operator occurs during work, an action code and a phone No. are displayed on the multi-information section (2). a Gear speed display section (1) keeps displaying normally. a The phone No. is displayed for only important action codes. The display shown at right is an example. (The form of the displayed phone No. depends on the form of the input No.) a If an important action code is displayed, the cau- tion lamp flashes and the caution buzzer sounds. An action code is displayed only when a serious fault occurs.

Even if an action code is not displayed, a fault may have occurred. If you feel any abnormality, be sure to check for a error code in the “Electric system error code display mode” and “Mechanical system error code display mode” of the service mode. Action codes table D85EX-15 20-169 (1) Action code Indication method of fault Contents of fault Remedy E01 • Only action code is displayed. • Backup alarm does not sound. • Fan speed is kept at maximum. • Automatic function stops or nor- mal function stops partially but machine can work. • Call your Komatsu distributor for repair. E02 • Action code is displayed. • Caution lamp flashes. • Caution buzzer sounds. • Gear is not shifted up or down.

• Engine boost pressure is abnor- mal. • Exhaust gas color is bad when temperature is low. • Stop engine and start it again, and you can operate machine without limiting function. You must take care, however. • Call your Komatsu distributor for repair. CALL E03 • Action code is displayed. • Caution lamp flashes. • Caution buzzer sounds. • Engine water temperature is de- fective. • Usable gear speeds are limited. • Engine speed does not rise fully. • Gear shifting shocks become large. • Steering performance lowers. • Brake shocks become large. • Move machine to safe place. • Call your Komatsu distributor for repair. CALL E04 • Action code is displayed. • Caution lamp flashes.

• Caution buzzer sounds. • Engine cannot be controlled. • Machine cannot travel. • Machine stops. • Stop machine immediately. • Call your Komatsu distributor for repair.