TESTING AND ADJUSTING PM CLINIC SERVICE Pm CLINIC CHECK SHEET Always fill in the record when repairing, adjusting, or replacing main parts. D85EX-15 20-209 (2) D85EX, PX-15 Serial No Work order No. Date Service meter Serviceman / / h Item Measurement conditions Unit Standard value for new machine Service limit value Measurement results Pass Fail Steering brake Brake pressure Transmission: Neutral Engine at low idling MPa 2.75 – 2.94 Min. 2.26 Engine at high idling 2.75 – 2.94 Min.
2.45 Brake performance Engine at high idling, F2, brake actuated Machine must not move HSS oil pressure HSS main relief pressure PCCS lever (for travel) right FULL Engine at high idling MPa 38.2 – 41.7 38.2 – 41.7 PCCS lever (for travel) left FULL 38.2 – 41.7 38.2 – 41.7 Item Measurement conditions Unit Standard value for new machine Service limit value Measurement results Pass Fail Hydraulic components HSS and work equipment pump Ripper lift relief (EX) Engine at low idling MPa 20.4 – 22.8 21.3 – 23.7 Blade tilt relief (single tilt only) 20.4 – 22.8 21.3 – 23.7 Ripper lift relief (EX) Engine at high idling 21.3 – 23.7 21.3 – 23.7 Blade tilt relief (single tilt only) 21.3 – 23.7 21.3 – 23.7 PPC valve output pressure Blade tilt relief 3.82 – 4.12 3.82 – 4.12 Item Measurement conditions Unit Standard value for new machine Service limit value Measurement results Pass Fail Work equipment speed Blade RAISE Engine at low idling Sec.
8 - 15 Max. 20 Engine at high idling EX: 2.5 – 4.5 PX: 2.2 – 4.2 Max. 5.5 Max. 5.2 Tilt (left o right) Engine at low idling 3 – 5 Max. 7 Engine at high idling 1.7 – 2.7 Max. 3.5 Ripper RAISE (EX) Engine at low idling 7 – 10 Max. 13 Engine at high idling 2.0 – 3.0 Max. 4.0 Item Measurement conditions Unit Standard value for new machine Service limit value Measurement results Pass Fail Hydraulic drift Hydraulic oil temperature Engine stopped °C — — Blade lift cylinder mm/15 min. Max. 200 Max. 300 Ripper lift cylinder (EX) Max. 80 Max.
160 Item Measurement conditions Unit Standard value for new machine Service limit value Measurement results Pass Fail Visual inspection of final drive drain plug Engine stopped — There must be no excessive metal particles Date Service meter Repair record Date Service meter Repair record