TROUBLESHOOTING POINTS TO REMEMBER WHEN CARRYING OUT MAINTENANCE 3. Points to remember when handling hydraulic equipment With the increase in pressure and precision of hydraulic equipment, the most common cause of fail- ure is dirt (foreign material) in the hydraulic circuit. When adding hydraulic oil, or when disassembling or assembling hydraulic equipment, it is necessary to be particularly careful. 1) Be careful of the operating environment. Avoid adding hydraulic oil, replacing filters, or repairing the machine in rain or high winds, or places where there is a lot of dust.
2) Disassembly and maintenance work in the field If disassembly or maintenance work is carried out on hydraulic equipment in the field, there is danger of dust entering the equipment. It is also difficult to confirm the performance after repairs, so it is desirable to use unit exchange. Disas- sembly and main-tenance of hydraulic equip- ment should be carried out in a specially prepared dustproof workshop, and the perfor- mance should be confirmed with special test equipment. 3) Sealing openings After any piping or equipment is removed, the openings should be sealed with caps, tapes, or vinyl bags to prevent any dirt or dust from enter- ing.
If the opening is left open or is blocked with a rag, there is danger of dirt entering or of the surrounding area being made dirty by leaking oil so never do this. Do not simply drain oil out on to the ground, col- lect it and ask the customer to dispose of it, or take it back with you for disposal. 4) Do not let any dirt or dust get in during refill- ing operations. Be careful not to let any dirt or dust get in when refilling with hydraulic oil. Always keep the oil filler and the area around it clean, and also use clean pumps and oil containers.
If an oil cleaning device is used, it is possible to filter out the dirt that has collected during storage, so this is an even more effective method. 20-310 D85EX-15 (1)