Komatsu — TABLE OF FULE, COOLANT AND LUBRICANT

GENERAL TABLE OF FUEL, COOLANT AND LUBRICANT NOTE (1) When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic mainte- nance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5%. Fuel sulphur content Change interval of oil in engine oil pan 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval (2) When staring the engine in an atmospheric tem- perature of lower than 0°C, be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40, even though an atmospheric tem- perature goes up to 10°C more or less in the day time.

(3) Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half. (4) There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil that matches the temperature in the table on the left. (5) We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydraulic work equipment applications. Use API classification CD, CE or CF-4 as engine oil. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API: American Petroleum Institute Specified capacity:

Total amount of oil including oil for components and oil for com- ponents and oil in piping. Refill capacity:Amount of oil needed refill system during normal inspection and mainte- nance. D85EX-15 01-11