STRUCTURE, FUNCTION AND MAINTENANCE STANDARD POWER TRAIN POWER TRAIN Outline The power generated by engine (1) has its tor- sional vibration dampened by damper (2), and then passes through universal joint (3), and is transmitted to torque converter (8). The power from the engine is transmitted through the oil by torque converter (8) to the transmission input shaft (turbine shaft) in accor- dance with the change in load. Transmission (9) uses a combination of a plane- tary gear system and hydraulic clutches to reduce the speed and shift the gears (3 forward gears and 3 reverse gears).
It connects 2 sets of clutches selected according to the change in load, and transmits the power to bevel gear (10) from the bevel pinion at the rear end of the trans- mission. The power transmitted to the bevel gear shaft is transmitted to HSS (Hydrostatic Steering Sys- tem) (11). Hydraulic, HSS pump (5) is driven by PTO (6), and output oil of the hydraulic, HSS pump (5) drives HSS motor (12). The rotation of the pair of the HSS gears on the right and left is controlled by HSS motor (12). The steering is carried out by generating a difference in speed on the right and left.
It is also possible to use the HSS mechanism to rotate the right and left sides in opposite directions to carry out pivot turns. Brake (13) of the HSS is used for braking the machine. Brake (13) is a wet, multiple disc clutch, spring boosted type. The power sent from brake (13) is transmitted to final drive (14). Final drive (14) consists of a single-stage spur gear and a single-stage planetary gear system. It reduces the speed and rotates sprocket (15) to drive track shoe (16) and move the machine. It also rotates fan motor (19) with the oil dis- charged from fan pump (7) driven with PTO (6). 10-2 D85EX-15