TROUBLESHOOTING ERROR CODE DAQ9KQ DB39KQ ERROR CODE DAQ9KQ DB39KQ (STEERING AND TRANSMISSION CONTROLLER TYPE COLLATION: TYPE SELECT SIGNAL INCONSISTENCY (KQ)) Circuit diagram related to transmission controller type selec D85EX-15 20-463 (1) Action code Error code Controller code Trouble ( Steering and transmission controller type collation: type select signal inconsistency (KQ) Steering and transmission controller system) CALL E04 DAQ9KQ DB39KQ Steering and transmission Contents of trouble • Internal spec. setting of steering and transmission controller is inconsistent with spec. set signal. Action of controller • Flashes caution lamp and turns on caution buzzer.
• Stops all outputs to steering and transmission controller. • Limits operation of engine, transmission, and brake. Problem that appears on machine • Machine does not operate at all. • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, it cannot travel any more. Related information • Both of DAQ9KQ and DB39KQ are displayed. • Method of reproducing error code: Turn starting switch ON.
Possible cause and standard value in normal state Cause Defective steering and 1 transmission controller ad- justment s Disconnection in wiring har- ness (Disconnection in wir- 2 ing or defective contact in connector) Defective steering and 3 transmission controller Standard value in normal state/Remarks on troubleshooting steering and ion controller ad- It is normal if error code lights on (reset display) after carrying out ad- justment mode. • Adjustment code: 0002: Steering and transmission controller spec. ction in wiring har- connection in wir- ective contact in r) aPrepare with starting switch OFF, carry out troubleshooting without turning starting switch ON.
Short circuit of wiring harness between STC3 (female) (30) with chassis ground Resistance Max. 1z steering and ion controller aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. STC3 Voltage Between (30) – chassis ground Max. 1V