Komatsu — ERROR CODE [DDE2L6] (ENGINE OIL PRESSURE SWITCH:REFER TO TABLE (L6))

TROUBLESHOOTING ERROR CODE DDE2L6 ERROR CODE DDE2L6 (ENGINE OIL PRESSURE SWITCH: REFER TO TABLE (L6) D85EX-15 20-491 (1) Action code Error code Controller code Trouble Engine oil pressure switch: Refer to table (L6) (Engine controller system) CALL E03 DDE2L6 ENG Contents of trouble • Signals of engine oil pressure switch are inconsistent with engine state. Action of controller • Flashes caution lamp and turns on caution buzzer. • Limits operation of engine and transmission. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, travel is limited to F1 and R1.

Related information • Input state (ON/OFF) from engine oil pressure switch can be checked in monitoring mode. (Code 40900: Engine controller input signal 1) • Method of reproducing error code: Turn starting switch ON or start engine. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective low engine oil pressure switch (Internal disconnection/short circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON or by starting engine. PSL Engine Resistance Between terminal – chassis ground Stop Max. 1z Min. 600rpm Min.

1Mz 2 Defective high engine oil pressure switch (Internal disconnection/short circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON or by starting engine. PSH Engine Resistance Between terminal – chassis ground Stop Max. 1z Min. 1,300rpm Min. 1Mz 3 Disconnection in wiring har- ness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC1 (female) (21) – PSL Resistance Max. 1z Wiring harness between EGC1 (female) (15) – PSH Resistance Max.

1z 4 Short circuit with chassis ground in wiring harness (Contact with ground circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Short circuit of wiring harness between EGC1 (female) (21) – PSH with chassis ground Resistance Min. 1Mz 5 Defective engine controller aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON or by starting engine. EGC1 Engine Voltage Between (21) – chassis ground Stop Max. 1V Min. 600rpm 20 – 30V Between (15) – chassis ground Stop Max. 1V Min. 1,300rpm 20 – 30V