Komatsu — H-5 WHEN GEAR IS SHIFTED OR TRAVEL DIRECTION IS CHANGED, LARGE TIME LAG IS MADE

TROUBLESHOOTING H-5 H-5 WHEN GEAR IS SHIFTED OR TRAVEL DIRECTION IS CHANGED, LARGE TIME LAG IS MADE D85EX-15 20-707 (1) Trouble • Time lag is excessive when shifting gear or changing direction. Related information • Confirm that the oil quantity on the power train is normal before troubleshooting. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective power train pump The power train pump is assumed to be defective; directly check it. 2 Defective set pressure of transmission main relief valve or internal defect aPrepare with starting switch OFF, then drive the engine in high idling mode for troubleshooting.

PCCS lever Transmission main relief pressure Full neutral Min. 2.84MPa{Min. 29kg/cm2} aPrepare with the starting switch OFF, then carry out troubleshooting without turning the starting switch ON. Directly check that the spring length and the number of shims are nor- mal and also that the spool rotates smoothly. • Free length of large spring: 128mm • Free length of small spring: 108mm • Number of shims: 6 3 Defective transmission valve (ECMV) function aPrepare with starting switch OFF, then drive the engine in low idling mode for troubleshooting. (Before this, confirm that the transmission main relief pressure is normal.) Transmission clutch Clutch pressure FWD Min. 1.96MPa {Min.

20kg/cm2} REV Min. 2.55MPa {Min. 26kg/cm2} 1ST Min. 2.16MPa {Min. 22kg/cm2} 2ND Min. 2.35MPa {Min. 24kg/cm2} 3RD Min. 2.55MPa {Min. 26kg/cm2} 4 Defective transmission clutch seal When the troubleshooting in cause 3 is abnormal, the clutch seal is as- sume to be defective; directly check it. 5 Internally defective trans- mission clutch The transmission clutch is assumed to be defective internally; directly check it. 6 Defective brake function (Drag) aMove to a flat place, then start the engine for troubleshooting. If the machine does not run by low idling + F2 operation, brake drag occurs. (Carry out troubleshooting “Brake does not work.”)