Komatsu — TRANSMISSION

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD TRANSMISSION Forward 1st When the transmission is set to FORWARD 1st, the No. 2 clutch and No. 5 clutch are engaged. The motive force from the torque converter transmitted to input shaft (5) is then transmitted to output shaft (19). No. 2 clutch is actuated by the hydraulic pres- sure applied to the clutch piston, and holds ring gear (30) in position. No. 5 clutch is actuated by the hydraulic pressure applied to the clutch pis- ton, and engages ring gear (20). The motive force from the torque converter is transmitted to input shaft (5), and the rotation of the input shaft passes through sun gear (29) and is transmitted to planet pinion (13).

Ring gear (30) is held in position by No. 2 clutch, so the rotation of planet pinion (13) rotates car- rier (31), which is on the inside of ring gear (30). Carrier (31) and carrier (27) are joined by a spline, and rotate as one unit, so the rotation of carrier (31) passes through planet pinion (24) and is transmitted to ring gear (25). Carrier (21) is meshed with ring gear (25), and rotates as one unit, so the rotation is transmitted to planet pinion (17). Ring gear (20) is being held in position by No. 5 clutch, so the rotation of planet pinion (17) rotates sun gear (18), and this rotates output shaft (19). 10-26 D85EX-15