DISASSEMBLY AND ASSEMBLY PRECAUTIONS WHEN PERFORMING OPERATION PRECAUTIONS WHEN PERFORMING OPERATION Be sure to follow the general precautions given below when performing removal or installation (disassmbly or assembly) of units. 1. Precautions when performing removal work If the engine coolant water contains antifreeze, dispose of it correctly. After disconnecting hoses or tubes, cover them or install blind plugs to prevent dirt or dust from entering. When draining oil, prepare a container of adequate size to catch the oil. Confirm the match marks showing the installation position, and make match marks in the necessary places before removal to prevent any mistake when assembling.
To avoid loosening any wire contacts, do not pull on the wires. In-order to prevent excessive force to the wiring, hold onto the connectors when disconnecting them. Fasten tags to wires and hoses to identify and show their installation position and help to prevent any mistakes when re-installing. Count and check the number and thickness of the shims, and keep them in a safe place. When raising or lifting components, be sure to use proper lifting equipment of ample strength and safety. When using forcing screws to remove any components, tighten the forcing screws uniformly in turn.
Before removing any unit, clean the surrounding area and install a cover to prevent any dust or dirt from entering after removal. a Precautions when handling piping during disassembling Fit the following blind plugs into the piping after disconnecting it during disassembly operations. A. Face seal type hoses and tubes B. Split flange type hoses and tubes C. If the part is not under hydraulic pressure, the following corks can be used.
D85EX-15 30-5 (2) Nominal number Plug (nut end) Nut (elbow end) 02 07376-70210 02789-00210 03 07376-70315 02789-00315 04 07376-70422 02789-00422 05 07376-70522 02789-00522 06 07376-70628 02789-00628 Nominal number Flange (hose end) Sleeve head (tube end) Split flange 04 07379-00400 07378-10400 07371-30400 05 07379-00500 07378-10500 07371-30500 Nominal number Part Number Dimensions D d L 06 07049-00608 6 5 8 08 07049-00811 8 6.5 11 10 07049-01012 10 8.5 12 12 07049-01215 12 10 15 14 07049-01418 14 11.5 18 16 07049-01620 16 13.5 20 18 07049-01822 18 15 22 20 07049-02025 20 17 25 22 07049-02228 22 18.5 28 24 07049-02430 24 20 30 27 07049-02734 27 22.5 34