Komatsu — TRANSMISSION

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD TRANSMISSION Reverse 1st When the transmission is set to REVERSE 1st, the No. 1 clutch and No. 5 clutch are engaged. The motive force from the torque converter transmitted to input shaft (5) is then transmitted to output shaft (19). No. 1 clutch is actuated by the hydraulic pres- sure applied to the clutch piston, and holds car- rier (36) in position. No. 5 clutch is actuated by the hydraulic pressure applied to the clutch pis- ton, and engages ring gear (20). The motive force from the torque converter is transmitted to input shaft (5), and the rotation of the input shaft passes through sun gear (6) and is transmitted to planet pinion (9).

Carrier (36) is held in position by No. 1 clutch, so the rotation of planet pinion (9) rotates ring gear (8). Ring gear (8) rotates in the opposite direction from the input shaft, and rotates carrier (31). Carrier (31) and carrier (27) are joined by a spline, and rotate as one unit, so the rotation of carrier (31) passes through planet pinion (24) and is transmitted to ring gear (25). Carrier (21) is meshed with ring gear (25), and rotates as one unit, so the rotation is transmitted to planet pinion (17). Ring gear (20) is being held in position by No. 5 clutch, so the rotation of planet pinion (17) rotates sun gear (18), and this rotates output shaft (19). D85EX-15 10-29