DISASSEMBLY AND ASSEMBLY SPECIAL TOOL LIST SPECIAL TOOL LIST a Tools with part number 79 T- - can not be supplied (they must be locally manufactured). a Necessity: t ..........Cannot be substituted, should always be installed (used) q ..........Extremely useful if available, can be substituted with commercially available part. a New/Remodel:N ..........Tools with new part numbers, newly developed for this model. :R ..........Tools with upgraded part numbers, remodeled from items already available for other models. :Blank.
...Tools already available for other models, used without any modification a Tools marked in the Sketch column are tools introduced in the sketches of the special tools (See SKETCHES OF SPECIAL TOOLS). D85EX-15 30-7 (5) Component Symbol Part No.
Part Name Necessity Q’ty New/ Remodel Sketch Nature of work, remarks Engine assembly A1 795-471-1800 Remover t 1 N Removal of fuel supply pump 1 • 795-471-1810 • Plate 1 N 2 • 795-471-1820 • Bolt 1 N 3 • 795-471-1830 • Bracket 1 N 4 • 01435-01035 • Bolt 3 5 • 01435-01025 • Bolt 1 A2 795T-521-1140 Push tool t 1 Q Installation of engine front seal 790-101-5221 Grip t 1 • 01010-81225 • Bolt t 1 • 01050-31640 • Bolt t 3 A3 1 795-931-1210 Push tool t 1 Installation of engine rear seal • 01050-31625 • Bolt t 3 • 01050-31645 • Bolt t 3 2 795-931-1220 Push tool t 1 • 01050-31645 • Bolt t 3 A4 790-331-1110 Wrench t 1 Tightening of cylinder head bolt A5 795T-471-1550 Wrench t 1 Q Removal, installation of noz- zle tip Damper assembly B 791-612-1100 Installer t 1 Press fitting of bearing 790-101-4200 Puller (294kN {30ton}) t 1 790-101-1102 Hydraulic pump t 1 TORQFLOW transmis- sion assembly D1 791-415-1300 Puller assembly t 1 Removal, installation of snap ring of carrier D2 799-301-1600 Oil leak tester t 1 Operation check of piston HSS case assembly E1 791T-422-1320 Hanger t 1 Q Removal, installation of brake assembly E2 790-302-1500 Wrench set q 1 Removal, installation of bear- ing nut