DISASSEMBLY AND ASSEMBLY DAMPER DISASSEMBLY iii) Remove the O-ring from shaft (6), then remove collar (7-2) and inner race (7-1) of bearing (7). 1. Disassembly of damper cover assembly (1) 1) Coupling Remove bolt (3) from cover (2), then remove holder (4) and coupling (5). 3) Bearing and oil seal i) Remove oil seal (9) from cover (2), then remove inner race (7-3) of bearing (7). 2) Shaft i) Set damper cover assembly (1) on block [1]. ii) Push out shaft (6) by hitting it with a plas- tic hammer from the output side. a Shaft (6) comes out together with inner race (7-1) and oil seal (8) of bearing (7). ii) Remove inner races (7-4) and (7-5) of bearing (7) from cover (2). 30-50 D85EX-15 (2)