DISASSEMBLY AND ASSEMBLY TORQFLOW TRANSMISSION 2) Using eyebolt [2], lift off transmission case (7). 2) Disassemble the input shaft/front plate/No. 1 carrier assembly according to the following procedure. i) Remove snap ring (10), No. 2 sun gear (11), and snap ring (12). ii) Remove snap ring (13), No. 1 sun gear (14), and collar (15). 4. Tie bolts Remove 4 remaining tie bolts (8) iii) Remove snap ring (17). iv) Drive out the input shaft from the torque converter side and remove front cover (18). v) Remove collar (133) 5. Input shaft/Front plate/No. 1 carrier assembly 1) Using eyebolt [3], remove input shaft/front plate/No. 1 carrier assembly (9).
vi) Remove snap ring (19), then remove input shaft (20) by driving it out to the torque converter side. D85EX-15 30-63 (2)