DISASSEMBLY AND ASSEMBLY HSS iv) Remove snap ring (23), then remove bearing (28) from cover (32). v) Remove outer race (29) from cover (32). 5. Brake and carrier assembly 1) Remove the mounting bolts, and then remove brake assembly (34) with tool E1 . a Do not remove 4 hexagon socket head bolts. vi) Remove bearing (26) from shaft (21). Disassembly of brake assembly 1) Remove flange (36). 2) Remove snap ring (37) and spacer (38). 4) Remove the plug, spring (30), and valve (31). 3) Set puller [4], loosen 4 hexagon socket head bolts (40) and remove cover (41). a The inner race side of the bearing comes out. a Do not remove bolts (40) until cover (41) comes off. 30-78 D85EX-15 (2)