STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HSS SYSTEM 1. PCCS lever 2. Transmission, steering controller 3. Hydraulic, HSS valve 4. Hydraulic, HSS pump 5. Engine 6. EPC valve 7. Hydraulic tank 8. Sprocket 9. Final drive 10. HSS motor 11. HSS opening circuit 12. Servo valve 13. Engine controller A. Forward, reverse signal B. Steering signal C. Engine control information D. Hydraulic oil pressure signal E. CAN communication network Outline HSS system is an abbreviation for the Hydro- static Steering System. The HSS system consists of a set of hydraulic- HSS valve, piston pump, and piston motor.
It turns the machine continuously without lowering the travel speed by making a difference in speed between both tracks. The transmission, steering controller controls the EPC valve of the hydraulic-HSS valve to control the revolving direction and revolving speed of the HSS motor according to the tilting direction and angle of the PCCS lever. The HSS motor acts on the planetary gear mechanism of the bevel gear shaft to make a difference in speed between both sprockets. As a result, the machine turns.
The steering-transmission controller senses the engine speed and oil pressure at each part and controls the hydraulic, HSS pump and hydraulic, HSS valve to drive the HSS pump so that the engine will not stall. The engine speed signal and other engine con- trol information items are send and received through the CAN communication network which connects the engine controller and transmission, steering controller. D85EX-15 10-41