DISASSEMBLY AND ASSEMBLY RECOIL SPRING REMOVAL AND INSTALLATION OF RECOIL SPRING ASSEMBLY REMOVAL k Never stand in front of the idler assembly to prevent danger. 6. Remove spring (6) and seat (7). 1. Remove the blade assembly. For details, see REMOVAL OF BLADE ASSEMBLY. 2. Expand the track shoe assembly. For details, see EXPANDING TRACK SHOE ASSEMBLY. 3. Loosen mounting bolts (2) of support (1) and spring seat clamping bolts and remove plate (3). 7. Slide idler assembly (4) further and install wires on spring case (8) side, and then slide the assembly forward to remove. 4 Idler and recoil spring assembly: 640 kg 4. Pass wires through the hanging holes of idler assembly (4).
Sling idler assembly (4) and slide it out forward along the top of the track frame. 5. Remove guide plate (5). 8. Set idler and recoil spring assembly (9). k Take measures to prevent the idler assembly from leaning for safety. 4 Idler assembly: 290 kg D85EX-15 30-133 (2)