DISASSEMBLY AND ASSEMBLY FAN DRIVE REMOVAL AND INSTALLATION OF FAN DRIVE ASSEMBLY REMOVAL k Disconnect the cable from the negative (–) ter- minal of the battery. 1. Drain the hydraulic oil. 6 Hydraulic tank: D85EX-15; Approx. 150 l D85PX-15; Approx. 140 l 2. Remove the mounting bolt and open fan guard (1). 7. Disconnect 3 fan motor hoses (8), (9), (10). a Plug the hoses to prevent dirt from entering them. 8. Remove 2 lower mounting bolts of the fan drive assembly and spring (11). 3. Disconnect fan motor solenoid wiring connector FAR2 (2). 9. Sling the fan drive assembly temporarily and remove 3 upper mounting bolts (12). 4. Disconnect oil cooler hoses (3) and (4).
a Plug the hoses to prevent dirt from entering them. 5. Remove hydraulic oil cooler assembly (5). 6. Remove both fan guards (6) and (7). D85EX-15 30-211 (2)