DISASSEMBLY AND ASSEMBLY FAN MOTOR REMOVAL AND INSTALLATION OF FAN MOTOR ASSEMBLY REMOVAL INSTALLATION 1. Remove the fan drive assembly. For details, see REMOVAL OF FAN DRIVE ASSEMBLY. Carry out installation in the reverse order to removal. 2. Remove mounting bolt (1) and lock plate (2). [*1] a Tighten the nut to 142.2 Nm {14.5 kgm}. Then, align the holes on the front and back sides of the lock plate by retightening the nut by the minimum angle. 3. Remove nut (3). [*1] 3 Mounting nut: 1 32.4 – 156.9 Nm {13.5 – 16 kgm} 4. Using puller [1], remove fan (4). 5. Remove the 4 mounting bolts and fan motor assembly (5). D85EX-15 30-213 (2)