Komatsu — HYDRAULIC,HSS PUMP

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HYDRAULIC, HSS PUMP 3. Variable throttle valve (1) Operation in maximum direction for pump discharge amount Main pump pressure PP enters the variable throttle valve through port a . 1) When main pump pressure PP is high If the pressure becomes higher than the force of spring (3) because of the differ- ence in sectional area of spool (4) in chamber e , spool (4) moves to the right. If spool (4) moves to the right, the open- ing area between ports c and b is reduced by the notch at part A . Accord- ingly, less oil flows from the large diame- ter end of servo piston (1) and the moving speed of servo piston (1) is low- ered.

2) When main pump pressure PP is low Even if main pump pressure PP enters chamber e through port a , spool (4) pushes spring (3) less strongly and moves to the right for shorter distance. At this point, the opening area of part A increases and the oil flowing from the large diameter end of servo piston (1) through port c to port b is not limited and the moving speed of servo piston (1) is heightened. (2) Operation to reduce pump discharge The hydraulic oil flows from port b through port c to the large diameter side of servo pis- ton (1). Spool (4) operates according to main pump pressure PP as explained in the above sec- tion. D85EX-15 10-59