Testing Tools List Serial No. Range 1 0-250 N 2 2 m 3 0.1-10 mm 4 0-1 MPa 5 When start test, adjust or maintain, put the machine stops on the flat ground, set the safety lock between the front and rear frame, the work equipment is lowered to lower position and flameout the engine. Apply the parking brake and block the tire. When set or cancel the instruments, remove slowly the oil filter cover to release the pressure of hydraulic oil tank, then manipulate the control rod for several times to release the remaining pressure in the hydraulic pipeline. The person who doesn’t familiar with this machine accesses this machine is not allowed when the test is conducting.
The oil in the circular oil pipeline is hot, so you should pay care to prevent from scalding. 20-70 Test Items Tools Steering Wheel Manipulation Force Pull-push Weight Steering Wheel Manipulation Demonstration Disc Ruler Tire Radial Eccentricity Measuring Gauge Tire Expansion Pressure Tire Pressure Meter Outward Incline Angle Outward Incline Angle Meter