Check Tire Radial Eccentricity Special Tool Standard Measuring Gauge Inspection of Front Wheel 1) Start the engine and make the front wheel (1) off ground by using of the scraper blade as the jack. 2) Raise the rear wheel end of machine and put the lower part of the machine on a support. 3) Use the standard gauge A to measure the tire eccentricity through rotating tire by hand. Conduct measuring after engine is stopped. Check the tire’s expansion pressure Use the tire air pressure meter B to measure the expansion pressure of front and rear tires. 20-72 Serial No. Part Description Quantity A Standard Measuring Gauge 1 Tire Air Pressure Meter 1