Caterpillar — SAFETY SIGNS AND LABELS

10 Safety Section Safety Signs and Labels Engine Lifting fe High Voltage JE IE) g00664982 Illustration 8 The warning label for high voltage is located on the jacket water heater. ATs , HIGH injury RIGGING VOLTAGE 4 death. CAN ALLOW UNIT TO TUMBLE CAUSING INJURY AND DAMAGE. 1. YSE PROPER SPREADER BAR AS SHOWN. 2. ATIACH TWO PROPER RATED CABLES 1D SPREADER BAR FROM ENGINE LETING EYE... . REMOVE AFIERCODLER WATER LINES (F LIFTING APPARATUS TERFERES. # wt disconnect power could result in or The warning label for lifting the engine is located on the valve covers. IMPROPER LiF T Power Source must be disconnected before working on equipment.

Failure to source g00580494 Illustration 9 196mm) tN 7462 1 (43 18) MIN, 3508 ENG- 1112mm g00481390 Power source must be disconnected before working on equipment. (43.8 IN) 3512 ENG - 1652mm (3 IN) 3516 ENG- refon| 86.3. Ih] Pears S5DB ENG- 1112 REF 3512 ENG- 1652 REF Beni ENG eae - 2192 REF __ sczere g00306083 Failure to disconnect power source could result in injury or death. Improper lift rigging can allow unit to tumble caus- ing injury and damage. Before lifting the engine, read this Operation and Maintenance Manual, (Operation Section). “Engine Lifting” topic If improper equipment is used to lift the engine, injury and damage can occur.

Use cables that are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the warning label.