Komatsu D155AX-6 — TRANSMISSION ECMV

10 Structure, function and maintenance standard SEN00604-00 Outline of ECMV ECMV and proportional solenoid q The ECMV consists of 1 pressure control valve and 1 fill switch. q For each ECMV, 1 proportional solenoid is installed. The proportional solenoid generates thrust shown below according to the command cur- rent from the controller. The thrust generated by the proportional sole- noid is applied to the pressure control valve spool to generate oil pressure as shown in the figure below. Accordingly, the thrust is changed by controlling the command current to operate the pressure control valve to control the flow and pressure of the oil.

q Pressure control valve A proportional solenoid in this valve receives a current sent from the controller and this valve converts it to an oil pressure. q Fill switch This switch detects that the clutch is filled with oil and has the following functions. 1. Outputs a signal (a fill signal) to the controller to notify that filling is completed when the clutch is filled with oil. 2. Keeps outputting signals (fill signals) to the controller to notify whether oil pressure is applied or not while oil pressure is applied to the clutch. Current - propulsion force characteristics of proportional solenoid Propulsion force - Hydraulic pressure charac- teristics of proportional solenoid Range A:

Before shifting gear (When draining) Range B: During filling Range C: Pressure adjustment Range D: During filling (During triggering) Point E: Start of filling Point F: Finish of filling a The logic is so made that the controller will not recognize completion of filling even if the fill switch is turned “ON“ during triggering (Range D). ECMV and fill switch q For each ECMV, 1 fill switch is installed. If the clutch is filled with oil, the fill switch is turned “ON“ by the pressure of the clutch. The oil pressure is built up according to this signal. D155AX-6 43