Komatsu D155AX-6 — HSS SYSTEM

10 Structure, function and maintenance standard SEN00605-00 1. PCCS lever 2. Power train controller 3. Control valve 4. Hydraulic, HSS pump 5. Engine 6. EPC valve 7. Hydraulic tank 8. Sprocket 9. Final drive 10. HSS motor 11. HSS open circuit 12. Servo valve 13. Engine throttle controller Outline q HSS system is an abbreviation for the Hydro- static Steering System. q The HSS system consists of a set of control valve, hydraulic, HSS pump, and HSS motor as shown in the figure. It turns the machine continuously without lowering the travel speed by making a difference in speed between both tracks.

q The power train controller controls the EPC valve of the control valve to control the revolv- ing direction and revolving speed of the HSS motor according to the tilting direction and angle of the PCCS lever. The HSS motor acts on the planetary gear mechanism of the bevel gear shaft to make a difference in speed between both sprockets. As a result, the machine turns. A: FORWORD REVERSE signal B: STEERING signal C: Engine control information D: Work equipment pressure signal E:

CAN communication network q The power train controller senses the engine speed and oil pressure at each part and con- trols the hydraulic, HSS pump and control valve to drive the hydraulic, HSS pump so that the engine will not stall. q The engine speed signal and other engine control information items are sent and received through the CAN communication network which connects the engine throttle controller and power train controller. D155AX-6 3