Komatsu D155AX-6 — HYDRAULIC, HSS PUMP

10 Structure, function and maintenance standard SEN00605-00 Function q Piston (6) carries out relative movement in the axial direction inside each cylinder chamber of cylinder block (7). q The pump converts the engine rotation trans- mitted to its shaft to oil pressure and delivers pressurized oil corresponding to the load. q It is possible to change the delivery by chang- ing the swash plate angle. q Cylinder block (7) seals the pressurized oil to valve plate (8) and carries out relative rotation. q This surface is designed so that the oil pres- sure balance is maintained at a suitable level.

Structure q The oil inside each cylinder chamber of cylin- der block (7) is suctioned and discharged through valve plate (8). q Cylinder block (7) is supported to shaft (1) by spline (12). q Shaft (1) is supported by each bearing (13). q The end of piston (6) has a spherical hollow and is combined with shoe (5). q Piston (6) and shoe (5) form a spherical bear- ing. q Rocker cam (4) has flat surface (A), and shoe (5) is always pressed against this surface while sliding in a circular movement. q Rocker cam (4) conducts high pressure oil to cylinder surface (B) with cradle (2), which is secured to the case, and forms a static pres- sure bearing when it slides. D155AX-6 17