Komatsu D155AX-6 — HYDRAULIC, HSS PUMP

10 Structure, function and maintenance standard SEN00605-00 Control of delivery q If the swash plate angle (a) becomes larger, the difference between volumes (E) and (F) becomes larger and pump delivery (Q) increases. q Swash plate angle (a) is changed with servo piston (10). q Servo piston (10) reciprocates straight accord- ing to the signal pressure of the PC and the LS valve. q This straight line movement is transmitted to rocker cam (4) through slider (14). q Being supported by cradle (2) on the cylindrical surface, rocker cam (4) slides on the surface while continuing revolving movement.

q The area receiving the pressure is different at the left and right sides of servo piston (10), and the receiving pressure at the small diameter piston end is always connected with the main pump discharge pressure (self pressure) (PP). q Output pressure (PEN) of the LS valve is brought to the chamber receiving the pressure at the large diameter piston end. q The movement of servo piston (10) is con- trolled by the relationship of the size of the pressure (PP) at the small diameter piston end and the pressure (PEN) at the large diameter piston end , and the comparative size of the ratio of the area receiving the pressure at the small diameter piston end and large diameter piston end.

D155AX-6 19