10 Structure, function and maintenance standard SEN00605-00 1. Potentiometer 2. Lock lever 3. PCCS lever (Steering) 4. Limit switch 5. Power train controller 6. Rod (From brake pedal) 7. Brake pedal Outline q PCCS lever (3) sends electric signals to power train controller (5). Upon receiving those sig- nals, power train controller (5) sends signals to the EPC valve of the control valve to change the delivery of the pump and operate the steer- ing motor. q Brake pedal (7) receives signals from potenti- ometer (1) through rod (6). Then, power train controller (5) sends signals to the brake valve to operate the brake. Positions of levers and pedals A: Neutral B: Forward straight C:
Reverse straight D: Left turn E: Right turn F: Brake OFF G: Brake ON H: Free J: Lock q Lock lever (2) is connected to limit switch (4) and used as the parking brake lever, too. When it is in lock position "J", power train con- troller (5) does not send turning signals to the EPC valve of the control valve. D155AX-6 39