10 Structure, function and maintenance standard SEN00605-00 When steering operation is at “Right“ turn (forward travel) *A: Transmission output *B: HSS motor output *C: Combined output q When steering operation of PCCS lever is at “right turn“ while traveling forward, HSS motor (1) rotates in right direction, left side gear A (2) rotates in right direction, and right side gear A (2) rotates in left direction, viewing from the left side of the machine body. *1. Transmission output speed *2. HSS motor output speed *3. Left bevel gear shaft output speed (*1+*2) *4.
Right bevel gear shaft output speed (*1-*2) q Also, bevel gear shaft (4) and ring gear (6) linked to the shaft rotate in right direction, view- ing from the left side of the machine body. q Accordingly, considering the rotation number at left and right planet area, that of left side carrier (9) increases its speed with the output of HSS motor, and that of right side carrier (9) slows down, compared to that of straight forward travel. Therefore, the machine will travel to the right direction whose output rotation number is smaller. D155AX-6 53