Komatsu D155AX-6 — STEERING UNIT

10 Structure, function and maintenance standard SEN00605-00 Brake operation When the brake is “released“ When the brake is “applied“ q When the PCCS lever is in the “neutral“ posi- tion and the brake pedal is released, the maxi- mum brake pressure is applied to the back of brake piston (1) by the brake control valve. q If the brake pedal is depressed, the brake pressure applied to the back of brake piston (1) starts to lower by the brake control valve. q At this time, brake piston (1) is pushed back to the right by the tension of the brake spring (2) to press discs (3) and plates (4) against brake drum (5).Brake drum (5) is fixed to the steering case.

q As the oil pressure rises, brake piston (1) com- presses brake spring (2) and moves to the left to eliminate the pressing force between discs (3) and plates (4). q The power transmitted from bevel gear shaft through HSS to brake hub (6) is transmitted to output shaft (7), then to the final drive. q Power towards brake hub (6) or output shaft (7) is controlled by compressing disc (3) and plate (4). q The brake force can be adjusted by controlling the oil pressure applied to the back side of brake piston (1) according to the stroke of the brake pedal. D155AX-6 55