10 Structure, function and maintenance standard SEN00605-00 Outline of ECMV q The ECMV consists of 1 pressure control valve and 1 fill switch. q Pressure control valve A proportional solenoid in this valve receives a current sent from the controller and this valve converts it to an oil pressure. q Fill switch This is a switch to detect that a clutch or brake is filled with oil and has the following functions. 1. At the moment when the clutch or brake is filled with oil, the fill switch outputs the signal (fill signal) to the controller to notify the finish- ing of filling. 2.
While the oil pressure is applied to the clutch or brake, the fill switch outputs the signal (fill signal) to the controller to notify the presence of the oil pressure. ECMV and proportional solenoid q One proportional solenoid is mounted for each ECMV. The propulsion force is generated accord- ing to the command current from the con- troller. The propulsion force generated by the proportional solenoid is actuated on the spool of the pressure control valve and generates the oil pressure. Accordingly, by controlling the amount of the command current, the propulsion force changes and the pressure control valve is actuated, then the oil flow and oil pressure is con- trolled.
q For each ECMV, 1 fill switch is installed. If the clutch is filled with oil, the fill switch is turned “ON“ by the pressure of the clutch. The oil pressure is built up accord- ing to this signal. ECMV and fill switch q The ECMV is controlled by the command current from the controller to the propor- tional solenoid and the fill switch output signal. Operation of ECMV D155AX-6 59