10 Structure, function and maintenance standard SEN00606-00 Unit: mm No.
Remedy 1 2 3 Rebuild or replace 4 5 6 7 Replace bushing 8 9 Rebuild or replace D155AX-6 7 Check item Criteria Outer diameter of protrusion Standard size Repair limit 792 — Outer diameter of tread 750 725 Depth of tread 21 33.5 Thickness of tread 24 11.5 Width of tread 58.5 — Overall width 240 — Clearance between shaft and bushing Standard size Tolerance Standard clearance Clearance limit Shaft Hole 140 –0.350 –0.413 +0.265 +0.003 0.353 – 0.678 — Interference between shaft and ring Standard size Tolerance Standard interference Interference limit Shaft Hole 75 +0.046 +0.046 +0.13 –0.18 0.130 – 0.226 — Play of shaft in axial direction Standard size Repair limit 0.4 – 0.9