Komatsu D155AX-6 — SUSPENSION

10 Structure, function and maintenance standard SEN00606-00 1. Equalizer bar 2. Pivot shaft assembly 3. Cover 4. Thrust plate 5. Thrust plate 6. Pivot shaft 7. Seal cage 8. Seal 10. Side pin 11. Center pin Unit: mm Outline q The front of the track frame rocks up and down using the rear pivot shafts (6) as a fulcrum. Equalizer bar (1) rocks using center pin (11) as a fulcrum. The left and right track frames are connected by side pin (10). D155AX-6 21 No.

Check item Criteria Remedy 9 Press-fitting force for side pin bushing 27.46 – 64.7 kN {2.8 – 6.6 ton} — 12 Press-fitting force for center pin bushing 47.07 – 131.41 kN {4.8 – 13.4 ton} 13 Clearance between center pin and bushing Standard size Tolerance Standard clearance Clearan limit ce nce Replace bushing ce Shaft Hole 95 –0.036 –0.090 +0.279 +0.213 0.249 – 0.369 1.0 14 Clearance between side pin and bushing 70 –0.030 –0.060 +0.046 +0.046 0.030 – 0.106 1.0 15 Interference between side pin boss and bushing Standard size Tolerance Standard interferenc Interfere e limit Shaft Hole 130 +0.033 +0.015 –0.028 –0.068 0.043 – 0.101 — 16 Interference between pivot shaft and seal stopper ring 179 +0.083 +0.043 –0.053 –0.093 0.096 – 0.176 — 17 Clearance between pivot shaft and bushing (outer) Standard size Tolerance Standard clearance Clearan limit Shaft Hole 148 –0.145 –0.208 +0.099 +0.035 0.180 – 0.307 1.0 18 Clearance between pivot shaft and bushing (inner) 175 –0.145 –0.208 +0.095 +0.025 0.170 – 0.303 1.0