10 Structure, function and maintenance standard SEN00607-00 Operation q When blade lift spool (1) is at the “hold“ posi- tion, the pump discharge pressure (unload pressure) is sent to chambers (D) and (D'). q The pressure is not formed in chambers (H) and (H'), so pressure compensation valve spool (3) and steering priority valve spool (4) are pushed completely to the right. q The pump pressure passes through chambers (A) and (B) of steering priority valve spool (4), and is sent to chamber (C) of the blade lift valve. From here it goes through chamber (D) and chamber (E) to chamber (F).
q In the same way as described in topic “(1) Steering valve“, the position of pressure com- pensation valve spool (3) is determined to match the opening of blade lift spool (1), and the oil flow is determined so that the pressure loss of the control valve becomes equal to the control differential pressure ( LS) of pump LS valve. D155AX-6 35