Komatsu D155AX-6 — CONTROL VALVE

10 Structure, function and maintenance standard SEN00607-00 Function When pump swash plate does not reach maxi- mum angle q The steering valve is equipped with steering priority valve spool (3), so if the steering valve and the downstream work equipment valve are operated at the same time, priority is given to the flow of oil to the steering valve, and the rest of the oil discharged from the pump goes to the work equipment valve. q When the maximum oil flow from the pump is greater than the sum of the flow demanded by the steering valve and work equipment valve, an amount of oil that matches the opening of steering spool (1) flows to the steering valve.

q An amount of oil decided by the pump dis- charge pressure, the load pressure and the area of the spool opening, flows to the work equipment valve. Operation q When steering spool (1) is operated by EPC valve output pressure (PI) and the oil flows, a differential pressure is created between cham- bers (C) and (D). When pump swash plate is at maximum angle q Steering priority valve spool (3) is controlled by this differential pressure, and at the same time, the pump swash plate angle is controlled at PLS = 2.0 MPa {20 kg/cm 2 }, and the flow of oil to the steering valve is fixed.

q When the maximum flow of oil from the pump is smaller than the sum of the oil flow demanded by the steering valve and work equipment valve. q For details, see “1. Steering valve“ of “Control of oil flow.“ 1) When steering valve load Z work equipment valve load. q In this condition, if downstream work equip- ment blade lift spool (2) is operated, the pump discharge pressure momentarily drops. q An amount of oil that matches the opening of steering spool (1) flows to the steering valve, and the remaining oil flows to work equipment valve.

q At this point, the differential pressure between chambers (C) and (D) becomes smaller, and steering priority valve spool (3) is moved to the left by the pressure in chamber (E) in the direc- tion to throttle the opening to the work equip- ment valve. 2) When steering valve load > work equipment valve load. q Pump discharge pressure (P) is determined by the steering valve load, but in this condition, if the downstream work equipment valve where the load is smaller is operated, the difference in pressure will cause the oil to try to flow to the work equipment valve, so the pump discharge pressure will drop.

q At the same time, PLS becomes smaller, so the pump swash plate angle moves in the max- imum direction to supply an oil flow to make up the amount that the pressures drops. q Steering priority valve spool (3) increases the size of the opening to the steering system, while at the same time reducing the size of the opening to the work equipment in order to ensure the flow of oil to the steering system. q In this condition, the flow of oil is divided in pro- portion to the difference in pressure between differential pressure (P) – (P1) and differential pressure (P) – (P2). The bigger (P1) – (P2) is, the smaller the flow of oil to the steering system becomes. D155AX-6 47